Central Silver
Conventional automatic fire detection and alarm control panel with up to 16 zones and 16 configurable relay outputs; this control panel is characterized by having independent zones and relay outputs.
In terms of zones, different models are contemplated to adapt in the most precise way to the needs of each installation with 2, 4, 8, 12 or 16 zones. As for relay outputs, the control panel supports up to 2 relay cards of 4 or 8 relays.
Additionally there are two variants of relay cards: With all relay outputs dry contact or with all relay outputs supervised; the configuration of each relay is independent.
It is compatible with 4 types of relay modules:
- Module 4 voltage free relays: SVL4
- Module 8 voltage-free relays: SVL8
- Module 4 supervised relays: SVS4
- Module 8 supervised relays: SVS8
The control panel can be connected to the analog loop of the Lyon system as an additional point.
Modbus, CRI, I-Link and Remote versions are available.
Key features
- Central with models of 2, 4, 8, 8, 12 or 16 zones with capacity to incorporate up to 32 elements per zone.
- Ability to include 4, 8, 12 or 16 relay outputs. These relays can be supervised (wet contact output) or without
supervising (dry contact output NO/NC). - 2 general siren outputs, supervised and with delayed activation from 0 to 10 minutes and protected by an auto
resettable fuse. - 1 dry contact alarm output and immediate activation named ALARM.
- 1 fault output, dry contact and delay activation between 0 and 10 minutes, protected by a resettable fuse
named FAULT. - 2 auxiliary 30VDC outputs, named 30V (non-resettable) and 30VR (resettable), both protected by a fuse, capable of
providing external power supply to elements such as fire door electromagnets, external sirens, relay modules
, etc. - 2 supervised general siren outputs, S1 and S2, with independent delay activation between 0 and 10 minutes, protected
by resettable fuses. - It incorporates, by default, the Spanish and English languages.
- Metal box with front screwed door, 13 pre-drilled holes of 28mm diameter for wiring and
space for 2 batteries of 12V and 7Ah. - Measures 320x415x130mm.
- IP30 protection.
- Certified according to EN54-2/A1 and EN54-4/A1.
