Conventional power plant CLVR

Conventional automatic fire detection and alarm system.

This fire control panel includes different models in order to adapt in the most precise way to the needs of each installation:

The characteristics of the CLVR fire fighting stations are common to all models.

Key features

Fire control panels up to 12 zones for use with conventional detectors and push buttons.
2 supervised general siren outputs, delayable from 0 to 10 minutes, each protected by a self-rearming fuse.
1 immediate alarm output through a NO/NC (Normally Open/Normally Closed) dry contact.
1 immediate fault output through a NO/NC (Normally Open/Normally Closed) dry contact.
2 auxiliary 30 V/DC outputs supervised and protected by a self-rearming fuse for external power supply (fire door electromagnets, sirens, etc.).
It has a Test Mode to facilitate quick and easy testing of detectors and pushbuttons.
Allows setting of open line, detector alarm and pushbutton alarm thresholds to suit operation with other detectors.
Supports configuring the last detection zone as a supervisory input from an external fire protection system giving fault indication.
Metal box with front screwed door, 4 pre-drilled holes of 28 mm and 1 rectangular hole in the bottom of 140 x 40 mm for wiring, plus space for 2 batteries of 7 Ah.
MODBUS protocol with RS485 output on request.
Possibility of ON-LINE software on PC using MODBUS functionality
CONTACTID on demand.
Certified according to EN 54-2 and EN 54-4 with CE marking.