A30XHTC0 algorithmic-directional multi-sensor for fire detection.
Algorithmic-directional multisensor for fire detection.
The A30XHTCO multisensor has three different types of sensors: An optical smoke sensor, a thermal sensor and a Carbon Monoxide (CO) sensor.
The use of the CO sensor is very valuable for the early detection of some types of fire.
In addition, its integration with the optical smoke sensor within its dynamic processing algorithm, gives as main results, a compact detector very robust against false alarms.
To complete its features, it incorporates a thermal sensor that is activated when a temperature of 60ºC is reached.
Key features
- Low profile, overall height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Dynamic processing algorithm that drastically reduces false alarm incidents.
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.