Socket for detectors D50Z0 and D50ZAL
Socket for fire detection and alarm detectors of the A50 and C50 range.
There are 2 versions: with low socket or with high socket (prepared for connection with 20 mm diameter pipe).
Key features
- Low profile, overall height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.
