A50xxD
Fire sensor A50xxD
A50 family fire sensor with additional functionality of visual alarm device (Light) and fire siren (sounD) integrated in a single device.
Within the A50 range, multiple combinations of optical, thermal, optical-thermal and UL-certified short-circuit detection are allowed.
To these functionalities can be added the visual alarm device functionality (A50xxL) based on EN 54-23, the fire siren functionality (A50xxD) based on EN 54-3, or both (A50xxLD).
The different models are:
A50SHILD: A50SHI with light and sound
A50SILD: A50SI with light and sound
A50HILD: A50HI with light and sound
A50SHID: A50SHI with sound
A50SID: A50SI with sound
A50HID: A50HI with sound
A50SHIL: A0SHI with light
A50SIL: A50SI with light A50SIL: A50SI with light
A50HIL: A50HI with light
Key features
- Different models with optical, thermal or optical-thermal sensor.
– Built-in short-circuit isolator.
– Low profile socket.
– Possibility of connection to a remote action indicator.
– Easy connection.
– Red and yellow bicolor LED.
– Indication, by means of the red led, of the communication with the control panel (blinking
simple), as well as the alarm status (led on).
– Indication, by means of the yellow LED (single flashing), of the activation of the
short-circuit isolator or the lack of communication with the control panel.
– Signaling of the sensor’s soiling status on the control panel display (the sensor
allows differentiation between rapid signal increases due to alarm and small
slow and sustained increases due to accumulation of dust and dirt).
– Easy-to-install head and socket, interchangeable throughout the A50 range, and
made of white heat-resistant ABS.
– UL certified according to EN 54-5 class A2R, EN 54-7, EN 54-17, EN 54-3 and
EN 54-23 with CE marking according to the European Construction Products Regulation
(EU) No 305/2011.
Technical Data Sheets
Manuals
A50xxLD
Fire sensor A50xxLD
A50 family fire sensor with additional functionality of visual alarm device (Light) and fire siren (sounD) integrated in a single device.
Within the A50 range, multiple combinations of optical, thermal, optical-thermal and UL-certified short-circuit detection are allowed.
To these functionalities can be added the visual alarm device functionality (A50xxL) based on EN 54-23, the fire siren functionality (A50xxD) based on EN 54-3, or both (A50xxLD).
The different models are:
A50SHILD: A50SHI with light and sound
A50SILD: A50SI with light and sound
A50HILD: A50HI with light and sound
A50SHID: A50SHI with sound
A50SID: A50SI with sound
A50HID: A50HI with sound
A50SHIL: A0SHI with light
A50SIL: A50SI with light A50SIL: A50SI with light
A50HIL: A50HI with light
Key features
- Different models with optical, thermal or optical-thermal sensor.
– Built-in short-circuit isolator.
– Low profile socket.
– Possibility of connection to a remote action indicator.
– Easy connection.
– Red and yellow bicolor LED.
– Indication, by means of the red led, of the communication with the control panel (blinking
simple), as well as the alarm status (led on).
– Indication, by means of the yellow LED (single flashing), of the activation of the
short-circuit isolator or the lack of communication with the control panel.
– Signaling of the sensor’s soiling status on the control panel display (the sensor
allows differentiation between rapid signal increases due to alarm and small
slow and sustained increases due to accumulation of dust and dirt).
– Easy-to-install head and socket, interchangeable throughout the A50 range, and
made of white heat-resistant ABS.
– UL certified according to EN 54-5 class A2R, EN 54-7, EN 54-17, EN 54-3 and
EN 54-23 with CE marking according to the European Construction Products Regulation
(EU) No 305/2011.
Technical Data Sheets
Manuals
EYEHOME Home Detectors
EYEHOMElife home detectors
El detector EYEHOMELife es un fotodetector que utiliza una de las cámaras de detección óptica más avanzadas.
Está diseñado para proporcionar protección contra incendios de uso doméstico sin cableado, siendo fácil de instalar.
La luz roja indicadora del detector es fácilmente observable. Parpadea una vez cada minuto para indicar que el detector está en estado de vigilancia. Cuando se produce una alarma de incendio, la luz indicadora permanecerá encendida de manera continua, el zumbador sonará durante un largo período de tiempo y la información de la alarma se enviará a través de Wi-fi a la nube, y desde aquí a la APP hasta que se desactivada.
Key features
Technical Data Sheets
Manuals
Keeper GAS
Keeper GAS
Keeper GAS, made of gray ABS plastic to detect city gas, natural gas, propane and butane.
Range of gas detectors for domestic use, autonomous, with the possibility of connection to the mains (220-230V) or 12V DC, with operation indicator, which emits an optical and acoustic signal in case of alarm.
Gas leaks or flame extinguishing in boiler rooms, kitchens, rooms with gas stoves or heaters, etc., can produce a high concentration of combustible gases in closed rooms, with the danger of explosion that this entails.
The Keeper GAS is especially suitable for the detection of combustible gases common in places such as those mentioned above.
MODELS
- Ref. DAG with 230 VAC power supply.
- Ref. DAGR with 230 VAC power supply and NO/NC dry contact relay for operating pilots, shut-off valves, etc.
- Ref. DAGR12V with 12 VDC power supply and NO/NC dry contact relay for operating pilots, shut-off valves, etc.
- Ref. DAGR24V with 24 VDC power supply and NO/NC dry contact relay to control pilots, shut-off valves, etc.
Key features
- Detectors for domestic use powered by mains (220-230V) or 12V DC.
- Operation indicator (green LED), optical (red LED) and acoustic alarm signal.
- It incorporates a thermal sensor that activates when the temperature reaches 84ºC.
- Relay detector option allows connection to a repeater unit (remote alarm), to a gas supply cut-off control system, or to a central alarm station.
- Particularly suitable for garages (Keeper CO only), boiler rooms, kitchens, rooms with gas stoves or heaters, etc.
- Designed according to European standard EN 50194.
- Dimensions: 140.5 x 73 x 48 mm.
Technical Data Sheets
Manuals
Keeper CO
Keeper CO
Range of gas detectors for domestic use, autonomous, with the possibility of connection to the mains (220-230V) or 12V DC, with operation indicator, which emits an optical and acoustic signal in case of alarm.
Keeper CO, made of black ABS plastic to detect carbon monoxide.
CO (carbon monoxide) is a highly toxic gas produced basically by any type of poor combustion, as well as by internal combustion engines.
The Keeper CO is especially suitable for CO detection in places such as garages, boiler rooms, kitchens, rooms with gas stoves or heaters, etc.
Key features
- Detectors for domestic use powered by mains (220-230V) or 12V DC.
- Operation indicator (green LED), optical (red LED) and acoustic alarm signal.
- It incorporates a thermal sensor that activates when the temperature reaches 84ºC.
- Relay detector option allows connection to a repeater unit (remote alarm), to a gas supply cut-off control system, or to a central alarm station.
- Particularly suitable for boiler rooms, kitchens, rooms with gas stoves or heaters, etc.
- Designed according to European standard EN 50194.
- Dimensions: 140.5 x 73 x 48 mm.
Technical Data Sheets
Manuals
Socket for detectors D50Z0 and D50ZAL
Socket for detectors D50Z0 and D50ZAL
Socket for fire detection and alarm detectors of the A50 and C50 range.
There are 2 versions: with low socket or with high socket (prepared for connection with 20 mm diameter pipe).
Key features
Technical Data Sheets
Manuals
Optical thermal detector C50SH
Optical thermal detector C50SH
Conventional optical-thermal detector
The C50 range of detectors is based on a new refined aesthetic that integrates the latest electronic technology with new, more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The C50 range allows multiple combinations between optical and thermal detection.
The model C50SH is a detector with two different types of sensors: An optical smoke sensor and a thermal sensor.
The optical sensor is specially designed to detect the presence of combustion aerosols in a three-dimensional design that makes it more robust to dirt.
For its part, the thermal sensor allows the thermovelocimetric response of the detector to be activated at a static temperature of 60ºC in the case of slow fire development.
Key features
- Optical and thermal sensor.
- Low profile, overall height less than 55 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Steady red LED to indicate its alarm status.
- Signaling of idle status by simple flashing of the LED every 10 seconds.
- Signaling of high soiling status by double flashing of the LED every 10 seconds.
- Easy-to-install head and socket, interchangeable throughout the C50 range, and made of white heat-resistant ABS.
- Certified by AENOR according to EN 54-5 class A2R and EN 54-7 with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
Thermal Detector C50TB
Thermal Detector C50TB
The C50 range of detectors is based on a new refined aesthetic that integrates the latest electronic technology with new, more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The C50 range allows multiple combinations between optical and thermal detection.
The model C50TB is a detector with a thermal sensor.
The C50TB detector is ideal in situations where the premises or building to be protected operates in warmer environments, and it is necessary for the detector to go into alarm at higher temperatures. The C50TB detector is set for a trigger temperature in static conditions of 70ºC.
Key features
- Thermal sensor.
- Low profile, overall height less than 42 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Steady red LED to indicate its alarm status.
- Easy-to-install head and socket, interchangeable throughout the C50 range, and made of white heat-resistant ABS.
- Certified by AENOR according to EN 54-5 class B (model C50TB), with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
Thermal Detector C50T
Thermal Detector C50T
The C50 range of detectors is based on a new refined aesthetic that integrates inside the latest electronic technology with new more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The C50 range allows multiple combinations between optical and thermal detection.
The C50T model is a detector with a thermal sensor.
The C50T model is set to trigger at static ambient temperatures of 60ºC.
Key features
- Thermal sensor.
- Low profile, overall height less than 42 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Steady red LED to indicate its alarm status.
- Easy-to-install head and socket, interchangeable throughout the C50 range, and made of white heat-resistant ABS.
- Certified by AENOR according to Standard EN 54-5 class A2 (model C50T), with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
Thermal Detector C50S
Thermal Detector C50S
Conventional optical detector
The C50 range of detectors is based on a new refined aesthetic that integrates inside the latest electronic technology with new more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The C50 range allows multiple combinations between optical and thermal detection.
The C50S model is a detector with an optical smoke sensor.
The optical sensor is specially designed to detect the presence of combustion aerosols in a three-dimensional design that makes it more robust to dirt.
Key features
- Optical sensor.
- Low profile, overall height less than 42 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Steady red LED to indicate its alarm status.
- Signaling of idle status by simple flashing of the LED every 10 seconds.
- Signaling of high soiling status by double flashing of the LED every 10 seconds.
- Easy-to-install head and socket, interchangeable throughout the C50 range, and made of white heat-resistant ABS.
- Certified by AENOR according to Standard EN 54-7 with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
