Socket for detectors D50Z0 and D50ZAL
Socket for detectors D50Z0 and D50ZAL
Socket for fire detection and alarm detectors of the A50 and C50 range.
There are 2 versions: with low socket or with high socket (prepared for connection with 20 mm diameter pipe).
Key features
- Low profile, overall height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.
Technical Data Sheets
Manuals
Optical Thermal Sensor A30XHA
A30XHA analog optical thermal smoke sensor for fire detection.
The A30XHA sensor is based on the Tyndall effect (refraction of light in a camera obscura) created in an optical camera.
The variation of the electrical characteristics in the presence of combustion aerosols makes it suitable for use as a smoke sensor.
It also incorporates a thermal sensor that is activated when a temperature of 60ºC is reached.
Key features
- Low profile, overall height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.
Technical Data Sheets
Manuals
Multisensor A30XHTC0
A30XHTC0 algorithmic-directional multi-sensor for fire detection.
Algorithmic-directional multisensor for fire detection.
The A30XHTCO multisensor has three different types of sensors: An optical smoke sensor, a thermal sensor and a Carbon Monoxide (CO) sensor.
The use of the CO sensor is very valuable for the early detection of some types of fire.
In addition, its integration with the optical smoke sensor within its dynamic processing algorithm, gives as main results, a compact detector very robust against false alarms.
To complete its features, it incorporates a thermal sensor that is activated when a temperature of 60ºC is reached.
Key features
- Low profile, overall height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Dynamic processing algorithm that drastically reduces false alarm incidents.
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.
Technical Data Sheets
Manuals
A30XHAS optical sensor
A30XHAS optical smoke sensor for algorithmic-directional fire detection.
The principle of operation of the A30XHA / A30XHAS sensor is based on the Tyndall effect (refraction of light in a dark chamber) created in an optical camera.
The variation of the electrical characteristics in the presence of combustion aerosols makes it suitable for use as a smoke sensor.
Key features
- jo profile, total height less than 53.4 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as of the alarm status (LEDs on).
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of white heat-resistant ABS.
- Certified by AENOR according to EN 54 part 7 and CE marked according to the European Construction Products Regulation (EU) Nº305/2011.
Technical Data Sheets
Manuals
Thermal sensor A30XTA
A30XTA thermal sensor, algorithmic-addressable for fire detection.
The principle of operation of the A30XTA sensor is based on the physical properties of an NTC. The variation of the electrical characteristics of the NTC thermistor due to the variation of the ambient temperature is what allows its use as a thermal sensor.
The A30XTA is capable of recording absolute temperatures (thermal sensor) as well as temperature increase ramps (thermovelocimetric function).
The thermovelocimetric function allows detection of a fire in the early stages of its development or, if the fire is very slow, it is activated when the temperature reaches 60°C.
Key features
- Low profile, overall height less than 45 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Double red alarm LED, which allows to identify the detector in alarm status from any direction (360º).
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Indication, by means of LEDs, of the communication with the control panel (single blinking), as well as the alarm status (LEDs on).
- Easy-to-install head and socket, interchangeable across the entire A30X range, and made of heat-resistant white ABS.
- AENOR certified according to EN 54 part 5 class A2R (sensors with thermovelocimetric function), and CE marked according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
Addressable alarm base A30XZSDDR
Addressable alarm base A30XZSDDR
Socket for A30X addressable algorithmic detectors with EN 54-23 certified visual alarm base and sound
EN 54-3 powered directly from the loop.
Key features
- Two models are available:
- A30XZSLDR: A30XZ socket with sound and light base, addressable.
- A30XZSDDR: A30XZ socket with sound base, addressable.
This device is configured in the addressable algorithmic system as a relay associated with its detector (SIRDR).
Typical uses for the A30XZSDDR and A30XZSLDR are spaces that require integrated fire detection equipment with siren and visual alarm, such as hotel rooms for hearing-impaired guests, waiting rooms, nurses’ stations, etc.
Technical Data Sheets
Manuals
Addressable alarm base A30XZSLDR
Addressable alarm base A30XZSLDR
Socket for A30X addressable algorithmic detectors with EN 54-23 certified visual alarm base and EN 54-3 sounder powered directly from the loop.
Key features
- Two models are available:
- A30XZSLDR: A30XZ socket with sound and light base, addressable.
- A30XZSDDR: A30XZ socket with sound base, addressable.
This device is configured in the addressable algorithmic system as a relay associated with its detector (SIRDR).
Typical uses for the A30XZSDDR and A30XZSLDR are spaces that require integrated fire detection equipment with siren and visual alarm, such as hotel rooms for hearing-impaired guests, waiting rooms, nurses’ stations, etc.
Technical Data Sheets
Manuals
Optical thermal sensor with isolator A50SHI
A50SHI addressable algorithmic optical thermal sensor
The A50 range of detectors is based on a new refined aesthetic that integrates the latest electronic technology with new, more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The A50 range allows multiple combinations between optical detection, thermal detection, CO sensor and UL certified short circuit isolator.
The model A50SHI is a detector that has a short-circuit isolator and two different types of sensors: An optical smoke sensor and a thermal sensor.
The optical sensor is specially designed to detect the presence of combustion aerosols in a three-dimensional design that makes it more robust to dirt.
For its part, the thermal sensor allows the thermovelocimetric response of the detector to be activated at a static temperature of 60ºC in the case of slow fire development.
Key features
- Optical and thermal sensor.
- Built-in short-circuit isolator.
- Low profile, overall height less than 55 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection.
- Red and yellow bicolor LED.
- Indication, by means of the red led, of the communication with the control panel (single blinking), as well as of the alarm status (led on).
- Indication, by means of the yellow LED (single flashing), of the activation of the short-circuit isolator or lack of communication with the control panel.
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable throughout the A50 range, and made of white heat-resistant ABS.
- UL certified according to EN 54-5 class A2R, EN 54-7 and EN 54-17 with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
A50SH optical thermal sensor
A50SH Algorithmic addressable optical-thermal A50SH sensor
The A50 range of detectors is based on a new refined aesthetic that integrates the latest electronic technology with new, more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The A50 range allows multiple combinations between optical detection, thermal detection, CO sensor and UL certified short circuit isolator.
The model A50SH is a detector with two different types of sensors: An optical smoke sensor and a thermal sensor.
The optical sensor is specially designed to detect the presence of combustion aerosols in a three-dimensional design that makes it more robust to dirt.
For its part, the thermal sensor allows the thermovelocimetric response of the detector to be activated at a static temperature of 60ºC in the case of slow fire development.
Key features
- Optical and thermal sensor.
- Low profile, overall height less than 55 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection, no polarity.
- Red and yellow bicolor LED.
- Indication, by means of the red led, of the communication with the control panel (single blinking), as well as of the alarm status (led on).
- Indication, by means of the yellow LED (single flashing), of the activation of the short-circuit isolator or lack of communication with the control panel.
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- Easy-to-install head and socket, interchangeable throughout the A50 range, and made of white heat-resistant ABS.
- UL certified according to EN 54-5 class A2R and EN 54-7 with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.
Technical Data Sheets
Manuals
Multisensor with isolator A50SHCOI
Multi-sensor detector with isolator A50SHCOI, intelligent and complete detection in one device
The A50 range of detectors is based on a new refined aesthetic that integrates the latest electronic technology with new, more efficient detection algorithms and a three-dimensional design that makes it more robust to environmental dirt.
The A50 range allows multiple combinations between optical detection, thermal detection, CO sensor and UL certified short circuit isolator.
The model A50SHCOI is a multi-sensor detector that has a short-circuit isolator and three different types of sensors: An optical smoke sensor, a thermal sensor and a Carbon Monoxide (CO) sensor.
The use of the CO sensor is very valuable for the early detection of some types of fire, since the production of this gas is very common, especially in the early stages of a fire. Its integration with the optical smoke sensor results in a compact detector that is very robust against false alarms.
To complete its features, it incorporates a thermal sensor with thermovelocimetric response, which is activated at a static temperature of 60ºC in the case of slow fire development.
Key features
- Optical, thermal and CO sensor.
- Built-in short-circuit isolator.
- Low profile, overall height less than 55 mm (including socket).
- Also available with high socket for 20 mm pipe.
- Possibility of connection to a remote action indicator.
- Easy connection.
- Red and yellow bicolor LED.
- Indication, by means of the red led, of the communication with the control panel (single blinking), as well as of the alarm status (led on).
- Indication, by means of the yellow LED (single flashing), of the activation of the short-circuit isolator or lack of communication with the control panel.
- Signaling of the sensor’s soiling status on the control panel display (the sensor allows differentiation between rapid signal increases due to alarm and small, slow and sustained increases due to accumulation of dust and dirt).
- CO and optical sensor processing algorithm that drastically reduces false alarm incidents.
- Easy-to-install head and socket, interchangeable throughout the A50 range, and made of white heat-resistant ABS.
- UL certified according to EN 54-5 class A2R, EN 54-7 and EN 54-17 with CE marking according to the European Construction Products Regulation (EU) No. 305/2011.