The Linear Heat Detector is a proprietary cable that detects heat at any point along its length.

The sensor cable consists of two steel conductors individually insulated with a temperature-sensitive polymer. The insulated conductors are twisted together to create a spring pressure, then wrapped with an outer sheath suitable for the environment in which the detector is to be installed.

At the calibrated temperature, the heat-sensitive insulating polymer yields against the pressure generated by the heat radiation, allowing the inner conductors to contact each other and trigger an alarm signal. This action occurs at any heated point within the length of the detector cable. No specific length is required to be heated to activate the alarm, nor is the system required to be calibrated to compensate for changes in the ambient temperature where it is installed.

The Linear Heat Detector provides the advantages of line coverage with specific point sensitivity.

Range of aspiration smoke detectors.

They detect smoke by analyzing the air aspirated through the holes of tubes distributed throughout the enclosure to be monitored and led to this detector.

This aspiration detector uses the latest technology in detection, avoiding false alarms, particle recognition, greater stability, sensitivity and longevity.

Typical applications of this range of detectors are: Data storage rooms, air conditioning units, computer rooms, equipment grilles, prison cells, air ducts, machine rooms, etc.

Flame detector to protect areas with open fires.

The detector is designed to respond to the flicker frequency and wavelength characteristics of flames.

There are three types of detectors depending on the sensors used to focus on specific wavelengths typical of flames and generate algorithms to discriminate such flames from other light sources.

Optical smoke barrier for fire detection system consisting of a system of emission / reception of an infrared optical beam.

The installation of these detectors is ideal for large rooms or rooms with very high ceilings.

The detector has a range of 8 to 100m maximum separation. It is powered from the fire panel or an external source. It has alarm and fault output connected to the zone.

The DLRCM detector is a linear optical smoke detector with motorized self-regulating microprocessor, which bases its operation on the interaction between the smoke present in an environment and an infrared beam emitted by the device and reflected by an optical reflector.

The configuration and alignment of the detector is done through Bluetooth connection via Android APP.

The installation of these detectors is ideal for large rooms or rooms with very high ceilings.